10mm Nylon End Lift Supports (2-Pack) - 18 Inch Extended, 80lbs Capacity - Heavy Duty Shocks & Struts for Automotive, RV, and Marine Applications

Why Purchase from Lift Supports Depot? Premium Quality Supports Lift Supports Depot supports undergo a vigorous QC process to help ensure dependability. Lift supports internal components get assembled and mechanically tested to ensure internal parts are not installed incorrectly or missing. OE quality seals are incorporated to prevent low friction losses and oil seepage. Airline hydraulic oil helps to avoid crystallization and blockage during cold weather. After painting and curing, lift supports are tested again for pressure and printed with final product information and lot numbers for traceability. Vigorous Quality Control Process The supports are pressure-filled and tested one by one for forces to be within accepted tolerances. Pressurized lift supports go through a pre-paint phosphate treating process, which helps the paint adhere properly to the body of the lift support and gives a long paint life. Most importantly, an automated paint cabin is used for painting and curing in one place. Our lift supports never have premature rusting at the extremities due to the capillary effect of paint in bent areas. Easy to Install Most applications are quick and easy to install. Often times requiring nothing more then a flat headed tool to remove and replace. The hardest part is often finding someone to hold the Hatch or Hood while you swap them out. Easy 4 Step Installation Process Lift Supports Depot Supports are designed to be easy to install and maintain OEM design. Most install simply with the use of a Flat Head tool, and an assistant to hold the hatch or hood open. We do not recommend doing this alone, many hatches are very heavy and can result in injury if done without help. Replaceing Lift Support Most applications are quick and easy to install. Often times requiring nothing more then a screwdriver to remove and replace. The hardest part is often finding someone to hold the Hatch or Hood while you swap them out. We encourage you to get someone to help as the hatch can be very heavy and cause harm if it it falls. Insert a Flat Headed tool behind the U-Band. Slightly Pull Back on the U-Band, allowing the claw to release the ball stud. Careful that you do not remove the U-band from the Support. Place new support over the ball stud and press the ball socket over the ball stud. Once this has been completed for all mounting points, carefully tug to ensure all ball sockets are secure on ball Stud.

Finding Correct Support This listing is for a lid weight of approximately 40 - 54 pounds. To find the right strength for your lid, weigh it using a 2x4 board or other vertical support to hold the lid open. Place the board halfway between the hinge and the front edge, where the support will attach to the lid. Then, place a scale on the ground under the board. Multiply by 1.5 the weight that the scale reads for an estimation of the force support you’ll need. If unsure, please contact us

Quality & Efficiency We provide lift supports for a variety of weights in both individual units and multi-packs. For example, if your lid weighs 100 lbs., then you will most likely need two (2) 150-lbs lift supports (Do not combine the pressure of the 2 supports). This listing includes 2 Universal Lift Supports designed for optimal functionality. Again, if unsure, please contact us and we can help with clarification

High Quality Supports, designed to last, and meet or exceed OEM specifications

Durable and Precision-Engineered Experience top-notch quality with high-quality supports that are meticulously designed to last and meet or exceed OEM specifications

MeasurementExtended Length from Center Mount to Center Mount is 18.0 in.This lift support offers exceptional support, ensuring the stability and functionality of your replacement components